30m/min 2.3KW Teflon Conveyor Belt UV Curing Equipment

High-Power Conveyor Belt UV Curing Equipment

Scope of application: UV UV ink curing, UV UV glue curing, UV varnish curing and UV coating, UV roll coating, UV varnishing for wood floors, wooden doors, furniture, UV curing and drying, or use alone.

Performance characteristics: wide format, strong load capacity, practical.
UV lamp layout: the top lamp double lamp lamp layout;
Adjustment of UV lamp: adjust the height and angle of each lamp individually;
The UV lamp adopts the condensing design, and the curing is even;
Forced air cooling to ensure proper temperature in the UV room;
The replacement of the UV lamp adopts a closed door device, which is easy to maintain.

technical parameter:
Power requirements: single-phase three-wire 220VAC (power frequency AC) 50HZ (hertz)
Whole machine power: about 2.3KW (kilowatt)
Dimensions: 1330 L (length) × 520W (width) × 1240H (height) mm
Conveying speed: 0-30 m/min (m/min)
Conveying width: 300mm (mm)
Mesh belt material: Teflon high temperature resistant mesh belt, matching unpowered roller
Cooling method: forced air cooling
Light source type: high-pressure Hg mercury lamp
Light wire power: 80w/cm
Light source configuration: 1KW *2.
Tube length: 400MM
Light source life: According to accelerated equivalent test, the average is greater than 1000 (h) hours, and the light attenuation is not less than 80%.
Main peak wavelength: 365nm (nm)
Typical features: aluminum reflector, multi-angle curing, suitable for products with a certain thickness
Typical application: UV curing of furniture paint, UV varnish curing, suitable for non-explosion-proof environment.

Application examples: ink for mobile phone shells, UV glue curing, etc.